7193 Owner’s Guide | Diagnostics |
1BH
61H 00H 1BH 64H 06H 1BH 6DH 16 H0CH 1BH 21H 30H 20H 37H 31H 35H 36H 20H 54H 68H 65H 72H 6DH 61H 6CH 2FH 49H 6DH 70H 61H 63H 74H 0AH 1BH 21H 20H 54H 54H 77H 6FH 20H 48H 65H 61H
Datascope Mode Print Test
Exit the Data Scope Mode
1.Turn the power off.
2.Set the switches to the settings in the table.
Switch 1 | Switch 2 | Switch 3 | Switch 4 | Switch 5 | Switch 6 |
|
|
|
|
|
|
On | Off | Off | On | Off | Off |
3.Turn the power back on to enter the settings into the EEROM and disable the Data Scope Mode.
The On Line light (green) blinks.
4.Turn the power off.
5.Set the DIP switches to the former settings.
DIP switch 1 must be Off to return the printer to the
6.Turn the power back on.
The printer is
May 1996
