1 – Keypad Mode
In Keypad mode, the control is operated by the keypad and opto isolated inputs and the analog command inputs are ignored. The analog output remain active.
Figure 3-7 Keypad Connection Diagram
+24VDC
Speed Output
Pot Reference
Analog Input 2
Analog Input 1
Analog GND
Fault
10
9
8
7
6
5
4
3
2
1
RLY1A
RLY1B
1Analog GND. Reference for analog inputs.
2Not used.
3Not used.
4+10VDC reference voltage for potentiometer.
5Analog output that represents the commanded speed output.
6+24VDC for Optical Inputs power.
7Not used.
8Not used.
9Not used.
10Not used.
RLY1 Digital output that represents the fault status.
MN735 |
