Baldor MN735 manual Section Specifications & Product Data, General Specifications

Section 6

Specifications & Product Data

General Specifications:
Enclosure:		Open Type (Protected Chassis)
Enclosure rating:	Europe	IP20
North America / Canada		Chassis/IP20
Mounting method:		Panel mount or DIN rail mounting (35mm).
Enclosure emissions:		Enclosure provides 15dB attenuation to radiated
		emissions between 30–100MHz. It must also
		require a security tool for opening.
Horsepower:		1/3–2 HP	@ 230VAC, 1 Phase
		3–5 HP	@ 230VAC, 3 Phase
		1/2–10 HP @ 460VAC, 3 Phase
Voltage Range: 230 VAC Models		198-264 VAC 1φ		60 Hz / 198-264 VAC 1φ	50 Hz
460 VAC Models		198-264 VAC 3φ		60 Hz / 198-264 VAC 3φ	50 Hz
		342-506 VAC 3φ		60 Hz / 342-506 VAC 3φ	50 Hz
Input Line Impedance:		1%
Service Factor:		1.0
Duty:		Continuous
Ambient Operating Temperature:		0 to +40 ° C with linear derating to 50 ° C
		(maximum).
Cooling:		Forced air included when required.
Rated Storage Temperature:		– 25 ° C to +55 ° C
Humidity:		10 to 85% RH @ 40 ° C Non-Condensing
Altitude:		Sea level to 3300 Feet (1000 Meters)
		Derate 1% per 330 Feet (100 Meters) above 3300
		Feet
Shock:		1G
Vibration:		0.5G at 10Hz to 60Hz
Climatic conditions:		Class 3k3, as defined by EN50178 (1998)
Safety:	Europe	EN50178 (1998), when installed inside suitable
		enclosure.
North America / Canada		UL508C
Overvoltage Category		Category III (3 phase power), Category II (1 phase
Pollution Degree		Logic power)
		Pollution Degree 2
EMC Compliance:	Immunity:	EN50082–1 (1992), EN50082–2 (1992),
Radiated Emissions:		EN61800–3
		EN50081–1(1992) and EN61800–3 when mounted
		inside the specified enclosure. Control and motor
		cables must be screened and correctly installed
		with shielded couplings where they exit the
		enclosure. Control 0V must be connected to
		protective earth/ground.
Conducted Emissions:		EN50081–1(1992), EN61800–3 unrestricted
		distribution, maximum motor cable length is 25m.

MN735 Specifications & Product Data 6–1