Table 4-1 Parameter Definitions Continued
Display | Parameter | Description | Range | Factory |
|
|
|
| Setting |
| NORMAL | HEAVY DUTY: the current limit is set to 150% | 0=False | 0 |
| DUTY | motor current, inverse time delay is set to 30s | 1=True |
|
NORMAL DUTY: the current limit is set to 110% motor current, inverse time delay is set to 10s
When P11 is changed from FAN to LINEAR, P12 is set to 0 (Heavy Duty)
When P11 is changed from LINEAR to FAN, P12 is set to 1 (Normal Duty)
P12 can be changed independently
FIXED BOOST | OUTPUT VOLTS |
|
| 0.00 to 25.00% | 5.00% |
| 100% |
| CONSTANT |
|
|
| INCREASED | POWER RANGE |
|
| |
| TORQUE |
|
|
|
|
| FLUXING | NORMAL FLUXING |
|
| |
|
|
|
| ||
| 25% | INCREASING |
|
|
|
| 0% | BOOST | FREQUENCY |
|
|
| f B |
|
| ||
|
|
|
|
| |
| fB = BASE FREQUENCY |
|
|
| |
PASSWORD | A password may be set to prohibit |
| 0000 E FFFF | 0000 | |
| unauthorised adjustment of parameters. When |
|
| ||
| P99 is set to |
|
| ||
| match this value before parameters can be |
|
| ||
| adjusted |
|
|
|
|
Parameters P301 to P308 are visible in the PAR menu when Application 3 is selected in parameter P1 |
| ||||
PRESET 0 | Preset 0 is normally connected to Setpoint. | - | |||
PRESET 1 | A |
| 20.00% | ||
PRESET 2 | A |
| 50.00% | ||
PRESET 3 | A |
| 100.00% | ||
PRESET 4 | A |
| |||
PRESET 5 | A |
| |||
PRESET 6 | A |
| |||
PRESET 7 | A |
| |||
Parameters P401 to P404 are visible in the PAR menu when Application 4 is selected in parameter P1 |
| ||||
R/L RAMP | The time taken to ramp the Raise/Lower output | 0.0 to 600.0s | 10.0s | ||
TIME | from 0.00% to 100.00% of its value |
|
| ||
R/L MAX | The maximum value for the ramp output | 100.0% | |||
VALUE |
|
|
|
|
|
R/L MIN VALUE | The minimum value for the ramp output | 0.0% | |||
R/L RESET | The value the output is set to when Reset is | 0.00% | |||
VALUE | TRUE, when DIN4 (terminal 10) is 24V in |
|
| ||
| Application 4 |
|
|
|
|
MN735 |
