Baldor MN735 manual Product Notice Intended use, Could result in damage to property, On next

Product Notice Intended use:

These drives are intended for use in stationary ground based applications in industrial power installations according to the standards EN60204 and VDE0160. They are designed for machine applications that require variable speed controlled three phase brushless AC motors.

These drives are not intended for use in applications such as:

–Home appliances

–Mobile vehicles

–Ships

–Airplanes

Unless otherwise specified, this drive is intended for installation in a suitable enclosure. The enclosure must protect the control from exposure to excessive or corrosive moisture, dust and dirt or abnormal ambient temperatures.

In the event that a control fails to operate correctly, contact Baldor for return instructions.

Safety Notice: This equipment contains high voltages. Electrical shock can cause serious or fatal injury. Only qualified personnel should attempt the start–up procedure or troubleshoot this equipment.

This equipment may be connected to other machines that have rotating parts or parts that are driven by this equipment. Improper use can cause serious or fatal injury. Only qualified personnel should attempt the start–up procedure or troubleshoot this equipment.

–System documentation must be available at all times.

–Keep non-qualified personnel at a safe distance from this equipment.

–Only qualified personnel familiar with the safe installation, operation and maintenance of this device should attempt start-up or operating procedures.

–Always remove power before making or removing any connections to this control.

PRECAUTIONS: Classifications of cautionary statements.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in injury or death.

Caution:	Indicates a potentially hazardous situation which, if not avoided,
	could result in damage to property.
	Continued on next page.

2–2 General Information MN735