Routine Maintenance
Periodically inspect the Inverter for
Saving Your Application Data
In the event of a repair, application data will be saved whenever possible. However, you should record your application settings before returning the unit. You should actually record the settings after programming. When a failure occurs, you may not be able to access the parameter values.
Contact Baldor to arrange for the repair.
Disposal This product contains materials which are consignable waste under the Special Waste Regulations 1996 which complies with the EC Hazardous Waste Directive – Directive 91/689/EEC. We recommend you dispose of the appropriate materials in accordance with the valid environmental control laws. The following table shows which materials can be recycled and which have to be disposed of in a special way.
Material | Recycle | Disposal |
|
|
|
metal | yes | no |
|
|
|
plastic materials | yes | no |
|
|
|
printed circuit board | no | yes |
|
|
|
The printed circuit board should be disposed of in one of two ways:
1.High temperature incineration (minimum temperature 1200_C) by an incinerator authorized under parts A or B of the Environmental Protection Act.
2.Disposal in an engineered land fill site that is licensed to take aluminium electrolytic capacitors. Do not dispose of in a land fill site set aside for domestic waste.
Packaging
During transport our products are protected by suitable packaging. This is entirely environmentally compatible and should be taken for central disposal as secondary raw material.
MN735 |
