
Display
when in the Parameter menu | Displays the units for the value: | |
when in the Setup menu | S for time in seconds, | A for current in Amps |
when displaying an Alarm code | V for voltage in Volts, | % for percentage |
|
|
a negative parameter value
Hz for frequency in Hertz
Represents a rotating motor shaft: | Not Used | |
| ||
CW = forward rotation |
| |
CCW = reverse rotation. | Local mode. | |
Parameter numbers or values, trip information, | ||
(Remote mode when | ||
error codes etc. See Drive Status Indications. | ||
hand is not visible. | ||
|
Drive Status Indications (shown on keypad)
Display | Status Indication and Meaning | Possible Cause |
| READY/HEALTHY No alarms present. |
|
| Remote mode selected |
|
PASSWORD Current password must be entered before this parameter may be altered.
LOCAL Local mode selected
Enter password to change the parameter. (See password protection).
Added or removed from the display
Diagnostics Menu
Display | Name | Description |
| FREQUENCY | The current output frequency in Hertz |
| SPEED SPT | The set point as a percentage of MAX SPEED |
| DC LINK VOLTS | VAC √ 2 = dc link Volts |
| MTR CURRENT | The current load value in Amps |
MN735 |