M-S Cash Drawer 7193 Select Printing Position of HRI Characters, Select Pitch of HRI Characters

Commands 7193 Owner’s Guide

Bar Code Commands

These commands format and print bar codes and are described in order of their Hex codes.

Select Printing Position of HRI Characters

Prints HRI characters (Human Readable Interface) above or below the bar code.

Hex	Decimal	ASCII	Value of n (Printing Position)		Default
1D 48 n	29 72 n	GS H n	0	= Not Printed	0
			1	= Above the Bar Code
			2	= Below the Bar Code
			3	= Both Above and Below the
			Bar Code

Select Pitch of HRI Characters

This command is not implemented and is ignored if received.

Hex	Decimal	ASCII	Value of n (Pitch)		Default
1D 66 n	29 102 n	GS f n	0	= Standard Pitch at CPI	0
			1	= Compressed Pitch at 19 CPI

Select Height of Bar Code

Sets the bar code height to n dots or n/152 inch (n/6 mm).

Hex	Decimal	ASCII	Value of n	Default
1D 68 n	29 104 n	GS H n	1-255	162

98 May 1996