-12
Cisco AS5350 Universal Gateway Chassis Installation Guide
78-10754-03 0A
Appendix
Replacing the Chassis Cover
Step 10 Replace the gateway chassis cover. (See the instructions in the following s ection “Replacing the Chassis
Cover.”)
Step 11 Connect the gateway to a console terminal.
Step 12 Power on the universal ga tew ay . If any mem ory-rel ated erro r messa ges appe ar , remo ve th e Flas h memory
SIMM and reinstall it, taking ca re to seat the SIMM firmly in th e so cke t.
Replacing the Chassis CoverThis section describes the procedure for replacing the chassis cover.
Required Tools and Equipment
•Medium Phillips screwdr iver
•Five screws
Chassis Cover Replacement
To replace the chassis cover, follow this procedure:
Step 1 Place the chassis bottom so that the front panel is facing you. (See Figure A-9.)
FigureA-9 Replacing the Chassis Cover
Step 2 Hold the chassis cover over the chassis bottom, and align e ach of the cover tabs with t he chassis tabs at
the top rear of the chassis.
35662
3
Chassis bottom
Front panel
Chassis cover