-12
Cisco AS5350 Universal Gateway Chassis Installation Guide
78-10754-03 0A
Appendix
Replacing the Chassis Cover
Replacing the Chassis Cover
To replace the chassis cover, follow this procedure:
Step 1 Place the chassis bottom so that the front panel is facing you.
Step 2 Hold the chassis cover over the chassis bottom, and align each of the cover tabs with the chassis tabs at
the top rear of the ch as s i s , a s shown in Figure B-14 .
FigureB-14 Replacing the Chassis Cover
Step 3 Lower the front of the top cover to cl ose the chassis, and ensure the fo ll owin g :
•The chassis cover tabs fit under the e dg e of the chassis rear panel so that th ey a re not exposed.
•The chassis tabs fit under the chassis cover so that they are not exposed.
•The chassis cover side tabs on both sides fit inside the chassis side panels so that they are not
exposed.
When the chassis cover is proper ly ass e m bl ed , n o ta bs are visible.
Step 4 Secure the chassis cover with five screws.
35662
3
Chassis bottom
Front panel
Chassis cover