Cisco Systems C892FSPK9 manual Primary Protection Device Location

Chapter 3 Connecting the Router

Connecting an xDSL Line

Figure 3-22 Primary Protection Device Location

Telecom Service

Overhead Service

Entrance

Home or Business

Router	Service Utilities Entrance
	or Demarcation Point
	Network Interface Box/
	Network Interface Device/
	Station Protector

Note: Primary Protection	* Alternative Underground Service Entrance
may be located Outside	Building Ground Rod connected to
or Inside of Premise
	Service entrance and Primary Protection

281392

To connect the router to a global industry standard symmetrical high-speed DSL (G.SHDSL) line, very-high-speed digital subscriber line 2 (VDSL2) port, or an ADSL2+ line, follow these steps:

Step 1 Connect one end of an RJ-11 (RJ-45 on 880 E models) cable to the port on the router. See Figure 3-23.

Figure 3-23 Connecting the xDSL Line

1

2

1

	232175
G.SHDSL port, VDSL2oPOTs port, or	2 DSL wall jack
ADSL2+ port

Step 2 Connect the other end of the cable to the DSL wall jack.

	Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
3-26	OL-16215-11