Cisco Systems C892FSPK9 Installing the 3G Adapter for Extended Cable/Antenna

3-17

Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide

OL-16215-11

Chapter 3 Connecting the Router

Installing the 3G Adapter for Extended Cable/Antenna

Step 8 Remove the protective tape from the adhesive on the bottom of the antenna cradle, then firmly press the

cradle to the flat surface.

Installing the 3G Adapter for Extended Cable/Antenna

For better signal and reception, if you are using the Cisco 3G Adapter for Extended Cable/Antenna,

3G-ACC-SMKTS9-TNC, follow these steps to install it:

Step 1 Locate and remove the Phillips screw on the left side of the router as shown in Figure 3-14. Keep the

screw aside for Step 4.

Figure 3-14 Locating the Phillips Screw

1Phillips screw on the left side of router 2Air vent holes to be aligned with adapter

279124