Cisco Systems C892FSPK9 Connecting a Modem to the Auxiliary Port, Terminal Emulator Settings

Chapter 3 Connecting the Router

Connecting a Modem to the Auxiliary Port

Terminal Emulator Settings

Use the following settings for the terminal emulator connection:

•9600 baud

•8 data bits, no parity

•1 stop bit

•No flow control

When the terminal emulator establishes communications, the router prompt is displayed.

For more information on terminal emulation settings, see Applying Correct Terminal Emulator Settings for Console Connections.

Connecting a Modem to the Auxiliary Port

To connect a modem to the router, follow these steps:

Step 1 Connect the RJ-45 end of the adapter cable to the Aux port on the router as shown in Figure 3-6.

Figure 3-6 Connecting a Modem to the Aux Port

272386

1

2

					3
						4
1			Aux port (RJ-45)	3	DB-9 to DB-25 modem adapter (if required)
2			Light blue console cable	4	Modem
		Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
	3-10						OL-16215-11