1-31
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-11
Chapter 1 Product Overview
Cisco 890 Series ISRs
Figure 1-35 shows the back panel of the Cisco 898EA router.
Figure 1-35 Back Panel of the Cisco 898EA Router
Caution The primary WAN port is designed for an RJ-45 connector only. Damage to the primary WAN
port may occur if a non-RJ-45 connector is inserted.
Figure 1-36 shows the front panel of the Cisco 898EA router.
Figure 1-36 Front Panel of the Cisco 898EA Router
7 6 GELAN 5 4
3 2 POE 1 0
8
GE WAN
SFP
854VDC 1.2A
12VDC 2.5A
SHDSL
RJ45 ONLY
CONSOLE
RESET
Cisco 898EA
AUX
344774
11
1 2 34 7 89 10
5 6
1GE WAN interface 7On/Off switch
2SFP port 8Reset button
3USB port 9Earth ground connection
48-port Gigabit Ethernet switch1
1. Port 0 through 3 can be configured as POE. POE is an optional feature for this model. If this feature was not configured with
the factory order, you must order and install it to enable the PoE function.
10 Kensington security slot
5Console / Auxiliary port 11 SHDSL (RJ45 Only)
6Power connector
1
344773
1LEDs