Cisco Systems C892FSPK9 manual Back Panel of the Cisco C888SRST-W Voice Router

Chapter 1 Product Overview

Cisco 880 Series ISRs

Figure 1-14shows the back panel details of the Cisco 888SRST-W voice router.

Figure 1-14 Back Panel of the Cisco C888SRST-W Voice Router

										241905
2	1	2	6	3	4	5	7	8	9	10

1	Primary WAN port1—G.SHDSL	6	Antenna—captive wireless omnidirectional
			dipole WLAN antenna (wireless models only)
2	Voice ports—four FXS/DIDports and one	7	Reset button
	voice BRI port
3	4-port 10/100 Ethernet switch2	8	Power connector
4	Serial port—console or auxiliary	9	Earth ground connection
5	PoE power connector for optional PoE	10	Kensington security slot
	module3

1.Depending on the router model, the primary WAN port can be either G.SHDL or 10/100 FE.

2.Ports 0 and 1 provide PoE with the optional PoE module installed.

3.The Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to ethernet ports 0 and 1. If this feature was not configured with the factory order, you must order and install the Field Replaceable Unit (FRU) to enable the PoE function. For this you either need the FRU “800-IL-PM=2” or “800G2-POE-2”. If your device has a separate PoE inlet, use the 800-IL-PM=2, if it has one combined inlet (a description saying “POE OPTION REQUIRES 5A POWER ADAPTOR”), then use the 800G2-POE-2.

Caution The primary WAN port on all 888E models is designed for an RJ-45 connector only. Damage to the primary WAN port may occur if a non-RJ-45 connector is inserted.

Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide

OL-16215-11 1-17