Cisco Systems C892FSPK9 manual C881WD

Chapter 1 Product Overview

Cisco 880 Series ISRs

Figure 1-19shows the back panel details of the C887VA-WD-A-K9 and C887VA-WD-E-K9 ISRs.

Figure 1-19 Back Panel of the C887VA-WD-A-K9 and C887VA-WD-E-K9 ISRs

9 8

overPOTS

0

Cisco 887VA-WD

FE LANCONSOLE

3 2 1 0 AUX

O

POE OPTION

REQUIRES 5A

POWER

ADAPTOR RESET

12VDC 5A

284988

	1		2	3	4	5	6	7
1	USB port	6	Power connector
2	4-port 10/100 Ethernet switch	7	Kensington security slot
3	Serial port—console or auxiliary	8	Power switch
4	Note No separate PoE power supply is	9	VDSL/ADSL port
	required for routers with embedded
	WLAN antennas. For information on
	system power supply requirements
	when PoE is enabled, see the “Power
	over Ethernet Module” section on
	page 1-43.
5	Reset button

C881WD

Figure 1-20shows the front panel details of the C881WD-A-K9 and C881WD-E-K9 ISRs. The front panel has LEDs only. All the ports are in the back panel.

Figure 1-20 Front Panel of the C881WD-A-K9 and C881WD-E-K9 ISRs

OK PPP	0	1		FE4	LINK 2.4GHz5GHz
		POE		WAN	WLAN
		FE LAN
VPN	0	1	2	3

Cisco 800 Series

284982

	Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-11		1-21