Chapter 3 Connecting the Router
Safety Warnings
Note The illustrations in this chapter show a wireless router with antennas attached.
Note Depending on the features available for your router, some content in this chapter may not apply to your router.
Safety Warnings
Warning When installing the product, please use the provided or designated connection cables/power cables/AC adaptors/batteries. Using any other cables/adaptors could cause a malfunction or a fire. Electrical Appliance and Material Safety Law prohibits the use of
Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001
Warning This equipment has been designed for connection to TN and IT power systems. Statement 1007
Warning There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Statement 1015
Warning Take care when connecting units to the supply circuit so that wiring is not overloaded. Statement 1018
Warning To avoid electric shock, do not connect safety
Warning Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables, detach the end away from the unit first. Statement 1026
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
| ||
|
