3-39
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-11
Chapter 3 Connecting the Router
Connecting a Small Form-Factor Pluggable Module
Figure 3-34 Figure 5-42 Disconnecting SFP Latch Mechanisms
Tip Use a pen, screwdriver, or other small straight tool to gently release a bale-clasp handle if you cannot
reach it with your fingers.
Step 3 Grasp the SFP on both sides and remove it from the router.
Online Insertion and Removal
Online insertion and removal (OIR) of the SFP module is supported on the Cisco 892F ISRs.
Note If an SFP module is inserted with auto-failover or SFP media-type already configured, the port is forced
to the speed and duplex capability of the SFP. For a 100 base SFP, the speed is set to 100 and duplex can
be configured to either half or full. For a 1000 base SFP, the speed is set to 1000 and duplex is set to full.
1Sliding latch 3Bale-clasp latch
2Swing and slide latch 4Plastic collar latch
117722