Cisco Systems C892FSPK9 manual Connecting a Small Form-Factor Pluggable Module, Safety Warnings

Chapter 3 Connecting the Router

Connecting a Small Form-Factor Pluggable Module

Connecting a Small Form-Factor Pluggable Module

This section describes how to connect and remove a small form-factor (SFP) module and contains the following information:

•Safety Warnings, page 3-37

•Installing an SFP Module, page 3-38

•Removing an SFP Module, page 3-38

•Online Insertion and Removal, page 3-39

Safety Warnings

Laser Safety Warnings

Optical SFPs use a small laser to generate the fiber-optic signal. Keep the optical transmit and receive ports covered whenever a cable is not connected to the port.

Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Statement 1051

Warning Do not stare into the laser beam. Statement 1010

Warning Invisible laser radiation present. Statement 1016

Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040

Warning Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do not view directly with optical instruments. Viewing the laser output with certain optical instruments (for example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye hazard. Statement 1056

Warning Use of controls, adjustments, or performing procedures other than those specified may result in hazardous radiation exposure. Statement 1057

	Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-11		3-37