Cisco Systems C892FSPK9 manual Indoors. Statement

		C H A P T E R 2
		Installing the Router
		This chapter describes the equipment and the procedures for successfully installing the Cisco 860 series,
		880 series, and 890 series Integrated Services Routers (ISRs), and contains the following sections:
		• Equipment, Tools, and Connections, page 2-2
		• Installing the Router, page 2-3
	Note	For compliance and safety information, see the Regulatory Compliance and Safety Information
		Roadmap that ships with the router and the Regulatory Compliance and Safety Information for Cisco 800
		Series.
Warning		All wireless LAN products in the 5.2/5.3GHz band cannot be used outdoors. Use the product only
		indoors. Statement 372
Warning		Read the installation instructions before connecting the system to the power source. Statement 1004
Warning		Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
		Statement 1030
Warning		Ultimate disposal of this product should be handled according to all national laws and regulations.
		Statement 1040
Warning		Do not locate the antenna near overhead power lines or other electric light or power circuits, or
		where it can come into contact with such circuits. When installing the antenna, take extreme care
		not to come into contact with such circuits, because they may cause serious injury or death. For
		proper installation and grounding of the antenna, please refer to national and local codes (for
		example, U.S.:NFPA 70, National Electrical Code, Article 810, Canada: Canadian Electrical Code,
		Section 54). Statement 1052
Warning		No user-serviceable parts inside. Do not open. Statement 1073
		Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-11			2-1