Cisco Systems C892FSPK9 manual Cisco 890 Series ISRs, Cisco 891, Cisco 892, and Cisco 892F

Chapter 1 Product Overview

Cisco 890 Series ISRs

FE WAN

4

1

Figure 1-21shows the back panel details of the C881WD-A-K9 and C881WD-E-K9 ISRs.

Figure 1-21 Back Panel of the C881WD-A-K9 and C881WD-E-K9 ISRs

						9
		Cisco 881WD				O
			FE LAN		CONSOLE
						POE OPTION				284987
						REQUIRES 5A
						POWER
						ADAPTOR	RESET
0
	3	2	1	0	AUX			12VDC	5A
2			3		4	5	6	7		8

1	Primary WAN port—10/100 FE	6	Reset button
2	USB port	7	Power connector
3	4-port 10/100 Ethernet switch	8	Kensington security slot
4	Serial port—console or auxiliary	9	Power switch
5	Note No separate PoE power supply is
	required for routers with embedded
	WLAN antennas. For information on
	system power supply requirements
	when PoE is enabled, see the “Power
	over Ethernet Module” section on
	page 1-43.

Cisco 890 Series ISRs

Cisco 891, Cisco 892, and Cisco 892F

The Cisco 891, Cisco 892, and Cisco 892F ISRs have the following features:

•Integrated 8-port 10/100 Ethernet switch for connecting to the LAN

•10/100 FE and 10/100/1000 Gigabit Ethernet (GE) port for connecting to the WAN

•Separate console and auxiliary ports

•Optional embedded Wi-Fi CERTIFIED™ dual radio 802.11a/b/g/n-compliant wireless AP

•Optional 4-port PoE

Note The Cisco 890 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to ethernet ports 0 through 3. If this feature was not configured with the factory order, you must order and install it to enable the PoE function.

	Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
1-22	OL-16215-11