Chapter 2 Cisco VXC Manager Configuration Quick Reference
Create a Cisco VXC Manager Package for the wlx.ini File
AutoConnect=yes \
Colors=16m \
Username=Administrator \
Password=Password \
Domainname=$DN \
Resolution=800x600 \
Reconnect=no \
Drives=J=disk \
Drives=k=floppy \
Sound=off \
LocalCopy=Yes
Caution In the above example, replace x.x.x.x with the IP address of your RDP server.
Create a Cisco VXC Manager Package for the wlx.ini File
To push a wlx.ini file to your clients, you must first create a Cisco VXC Manager package, which you can then schedule for distribution to your devices.
Caution Do not modify INI files directly on the Cisco VXC 6215 as doing so can cause configuration issues and operational errors. Only use Cisco VXC Manager to push the INI files to the clients.
Required Folder Structure with Cisco VXC Manager
With Cisco VXC Manager, you must create and register specific packages to push upgrades and configurations to your clients.
Cisco VXC Manager packages are structured relative to the location of an RSP file. To register the package with Cisco VXC Manager, the package must contain a unique RSP file and, at the same folder level, a folder with the same name as the RSP filename. This folder serves as the root folder for the remaining configuration files in the package.
For example, assuming <packagename>.rsp is the RSP file, the folder structure required to register the package is as follows:
~/<packagename>.rsp
~/<packagename>/wlx
~/<packagename>/wlx/bitmap
~/<packagename>/wlx/certs
~/<packagename>/addons
You can create this structure in any location on your Cisco VXC Manager server, as long as the placement of the folders relative to the RSP file remains the same.
Note If a folder does not contain a required file for the package, the folder can be omitted from the package directory structure. For example, if the package contains no graphics, the /wlx/bitmap folder is not required.
After you register the package, Cisco VXC Manager stores the package files in the software repository under c:\inetpub\ftproot\Rapport\<packagename>.
Administration Guide for Cisco Virtualization Experience Client 6215 Firmware Release 8.7
