Chapter 2 Cisco VXC Manager Configuration Quick Reference
Create a wlx.ini File for Client Configuration
Create a wlx.ini File for Client Configuration
Cisco VXC 6215 Initialization (INI) files are
The Cisco VXC 6215 supports a number of INI configuration parameters. See INI File Examples, page
Caution By default, an administrator username and password admin/admin is specified on the thin client. Cisco VXC 6215 does not support operation of the client using the administrator username and password in the current release (the only supported mode of operation is using the thinuser credentials). However, Cisco recommends that you change the administrator password using the ChangeAdminPassword INI parameter to prevent unauthorized access to the client.
To create the wlx.ini file, perform the following procedure.
Procedure
Step 1 Open a text file.
Step 2 Enter the INI parameters required in accordance with INI File Examples, page
Step 3 Save the file as wlx.ini.
Step 4 After you create the wlx.ini file, you must create a Cisco VXC Manager package to push the wlx.ini configuration to your clients. See Create a Cisco VXC Manager Package for the wlx.ini File, page
INI File Examples
Firefox Browser Configuration Example
The following is a simple INI file that you can use to test the Cisco VXC Manager client update process. After the package process is successful using this file, the client will load the INI file, and launch the Firefox browser with cisco.com as the home page.
Example:
CONNECT=BROWSER \ Description="Cisco Home Page" \ URL=http://www.cisco.com \ Resolution=FullScreen \ Mode=Normal \ autoconnect=yes \ LocalCopy=yes
Administration Guide for Cisco Virtualization Experience Client 6215 Firmware Release 8.7
