Cisco Systems ISR4451XK9 manual Copying the Startup Configuration to a Tftp Server Example

Chapter 4 Initial Configuration

Verifying Network Connectivity

SUMMARY STEPS

1.enable

2.copy nvram:startup-config {ftp: rcp: tftp:}

3.show bootflash:

4.copy {bootflash}: {ftp: rcp: tftp:}

DETAILED STEPS

	Command or Action	Purpose
Step 1
	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	copy nvram:startup-config {ftp: rcp: tftp:}	Copies the startup configuration file to a server.
		• The configuration file copy can serve as a backup copy.
	Example:	• Enter the destination URL when prompted.
	Router# copy nvram:startup-config ftp:
Step 3
	show {flash0flash1}:	Displays the layout and contents of a flash memory file
		system.
	Example:	• Learn the name of the system image file.
	Router# show {flash0flash1}:
Step 4
	copy {flash0flash1}: {ftp: rcp: tftp:}	Copies a file from flash memory to a server.
		• Copy the system image file to a server to serve as a
	Example:	backup copy.
	Router# copy {flash0flash1}: ftp:	• Enter the filename and destination URL when
		prompted.

Configuration Examples

Copying the Startup Configuration to a TFTP Server: Example

The following example shows the startup configuration being copied to a TFTP server:

Router# copy nvram:startup-config tftp:

Remote host[]? 172.16.101.101

Name of configuration file to write [rtr2-confg]? <cr> Write file rtr2-confg on host 172.16.101.101?[confirm] <cr> ![OK]

Copying from Flash Memory to a TFTP Server: Example

The following example shows the use of the show {flash0flash1}: command in privileged EXEC to

learn the name of the system image file and the use of the copy {flash0flash1}: tftp: privileged EXEC command to copy the system image to a TFTP server. The router uses the default username and password.

Router#Directory of bootflash:

	Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
OL-27644-01		4-21