Chapter 6 Installing and Upgrading Internal Modules and FRUs

Overview of the SSD Carrier Card NIM (NIM-SSD)

Figure 6-9 Opening the SSD slot cover

1

347343

1. Carrier card slot cover

Step 3 Insert an SSD in the lower slot first.

Step 4 The SSD should be inserted connector end first with the connector side down and serial number facing up (Figure 6-6).

Step 5 A second SSD may be inserted in the upper slot as shown in Figure 6-7.

Step 6 Rotate the SSD card slot cover up and into place over the SSD's.

Step 7 Re-tighten the captive fasteners on the SSD card slot cover.

Removing the SSD Drives from the NIM-SSD

To remove the SSD cards from the NIM carrier, follow these steps:

 

Step 1

On the NIM-SSD, loosen the captive screws retaining the NIM-SSD slot cover.

 

Step 2

Rotate the SSD card slot cover down, exposing the slots which hold the SSDs.

 

Step 3

To remove the SSD one at a time, pull the two tabs on the front of each SSD as shown in Figure 6-10.

 

Step 4

Rotate the SSD card slot cover up and into place over the SSDs.

 

Step 5

Re-tighten the captive fasteners on the SSD card slot cover.

 

 

Hardware Installation Guide for the Cisco 4451-X Integrated Services Router

 

 

 

 

 

 

 

 

 

 

 

 

OL-27644-01

 

 

6-13

 

 

 

 

 

Page 129
Image 129
Cisco Systems ISR4451XK9 manual Removing the SSD Drives from the NIM-SSD