Cisco Systems ISR4451XK9 manual Internal Slots

Chapter 1 Overview of the Cisco 4451-X Integrated Services Router

Hardware Features

Internal Slots

•Packet Voice Digital Signal Processor Modules, page 1-16

•Memory, page 1-16

•Compact Flash, page 1-15

Because of physical differences with the new slots, legacy network modules and legacy Service Modules require an adapter for installation.

Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030

Warning This equipment must be installed and maintained by service personnel as defined by AS/NZS 3260. Incorrectly connecting this equipment to a general-purpose outlet could be hazardous. The telecommunications lines must be disconnected 1) before unplugging the main power connector or 2) while the housing is open, or both. Statement 1043

See the Overview of Cisco Network Modules and Service Modules for Cisco Access Routers document for general information and single- and double-wide slot numbering.

See the Installing Cisco Network Modules in Cisco Access Routers document for instructions that describe how to install SMs in the router.

See the Overview of Cisco Interface Cards for Cisco Access Routers for general interface card information.

See the Installing Cisco Interface Cards in Cisco Access Routers document, for instructions that describe how to install legacy interface cards in the router.

Note See the router product page at Cisco.com for a list of supported network modules and interface cards for Cisco ISR 4451-Xs.

	Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
OL-27644-01		1-14