Chapter 6 Installing and Upgrading Internal Modules and FRUs

Removing, Replacing, and Installing an Internal PoE Card

Step 2 Access the PoE card slot. See the “Removing and Replacing the Chassis Cover” section on page 6-4.

Step 3 Locate the card to be removed or replaced. See Figure 6-29for the location of the PoE card on the motherboard.

Figure 6-29 Location of the PoE Card

1

361007

1

Location of the PoE card on the mother board.

Step 4 Pull the PoE card out of the connector on the motherboard.

If replacing the card, insert the new PoE card into the slot.

Step 5 Place the removed card in an antistatic bag to protect it from ESD damage.

 

 

Hardware Installation Guide for the Cisco 4451-X Integrated Services Router

 

 

 

 

 

 

OL-27644-01

 

 

6-42

 

 

 

 

 

Page 158
Image 158
Cisco Systems ISR4451XK9 manual Location of the PoE Card