Slot Numbering, About Slot, Console port | Cisco Systems ISR4451XK9

Chapter 1 Overview of the Cisco 4451-X Integrated Services Router

About Slots and Interfaces

Figure 1-9 Ports and Slots on the Cisco ISR 4451-Xs

1		3	4	5	6	7	8
	2
								L
								L
	15							285701
16	14		13	12	11	10	9

1	Gigabit Ethernet management port	2	USB port 0

3	USB console	4	Auxiliary port

5	Gigabit Ethernet port 0	6	Small-form-factor pluggable (SFP) 0

7	SFP 2	8	Gigabit Ethernet port 2

9	Gigabit Ethernet port 3	10	SFP 3

11	SFP 1	12	Console port

13	Gigabit Ethernet port 1	14	HDD 2 LED

15	HDD 1 LED	16	USB port 1

Slot Numbering

Slots are numbered 0, 1 and 2.

•About Slot 0

•About Slot 1 and 2

•Additional Slots

About Slot 0

The following are the main features of Slot 0:

•Slot 0 is the motherboard and not removable. It is reserved for integrated ports and NIMs.

•The front panel GE ports (or native interface ports) always reside in slot 0 and bay 0. There are four ports, and they are called Gigabitethernet 0/0/0, Gigabitethernet 0/0/1, Gigabitethernet 0/0/2, and Gigabitethernet 0/0/3.

•PVDM4s do not have an external slot number. Therefore, the nomenclature for PVDM4s always has 0 in the first tuple. For example, the 3-tuple for an PVDM4 might be 0/4/x.

Hardware Installation Guide for the Cisco 4451-X Integrated Services Router

	OL-27644-01	1-19

Image 37

Cisco Systems ISR4451XK9 manual Slot Numbering, About Slot, Console port, Slots are numbered 0, 1

Contents

Cisco Systems, Inc Page N T E N T S Additional Slots Ports and Cabling Safety Warnings Accessing Internal Modules Installing and Removing NIMs and SMs OIR Procedures Audience Objectives Chapter Title Description Organization Convention Indication Conventions Warnung Wichtige Sicherheitshinweise Bewaar Deze Instructies Aviso Instruções Importantes DE Segurança Avvertenza Importanti Istruzioni Sulla Sicurezza Xiv GEM Disse Anvisninger Xvi Related Documentation Searching for Cisco Documents Obtaining Documentation and Submitting a Service Request About the Cisco ISR Overview of the Cisco 4451-X Integrated Services Router Safety Warnings Chassis Views Safety Warnings for Finland, Norway and Sweden On page 1-4- Bezel view with one PSU Cisco ISR 4451-X Chassis Bezel side of the Cisco ISR 4451-X with two PSUs Bezel Side Leds of the Single PSU Cisco ISR 4451-X Model Locating the Serial Number, PID, VID and Clei Modular HDD Slot Factory-configuredPlatform Summary ISC slot For Additional Help Locating Labels on the Router Labels on Cisco ISRLabel Description Product ID Built-in Interface Ports Hardware Features Front Panel Ethernet Ports Dual Mode GE/SFP PortsUSB Serial Console Port Front Panel PoE+ Ports Internal PoE card LED IndicatorsRepresents Color Description Location Console Active Right Will be off Status Green Tbd Side Ports 0, 1 Amber Off Not presentActive Left Will be off Removable and Interchangeable Modules and Cards Two PoE PSUs installed and operating Redundant modeExternal Slots Internal Slots Compact Flash Network Interface Modules Cisco UCS E-Series Server ModulesSolid State Drives Power Supplies Packet Voice Digital Signal Processor ModulesMemory Fans, Ventilation, and Airflow About Slots and InterfacesAbout Slot, Subslot Bay, and Port Numbering This section covers the following topics 9shows the ports and slots on the Cisco ISR 4451-Xs Tuple Example Slot Bay Port About Slot Slot NumberingConsole port Slots are numbered 0, 1 Subslot/Bay Numbering SpecificationsGigabit Ethernet Management About Fixed Interfaces Power Description SpecificationIs disabled. See xxxx for a list of supported modules Ports Description Specification Regulatory For detailed compliance information, see the Regulatory Integrated Services Router document Periodic Inspection and Cleaning Standard Warning Statements General Safety WarningsPage Page Page Safety with Electricity Safety RecommendationsFollow these guidelines to ensure general safety Preparing for Router Installation Safety Recommendations General Site Requirements General PrecautionsPreventing Electrostatic Discharge Damage Site Selection Guidelines Site Environmental Requirements Environmental Characteristic Minimum Maximum Characteristics Physical CharacteristicsHeight Width Depth Weight Rack Requirements Router Environmental Requirements Network Cabling Specifications Power Guidelines and Requirements Console Port Connections Console and Auxiliary Port Considerations USB Console OS Compatibility Auxiliary Port Connections Ethernet Connections Preparing for Network Connections OL-27644-01 Task Verified by Date Installation Checklist Creating a Site Log Installing and Connecting the Router Page What You Need to Know CLI Console AccessBefore You Begin Slot and Port Numbers Unpacking the Router Installing the Router Attaching Rack-Mount Brackets Rack-Mounting the ChassisStatement Inch SBC brackets Inch EIA brackets Inch SBC 1 brackets Inch EIA brackets Mounting the Router in a Rack Bracket Installation for Back Mounting 5shows a typical installation in a rack Mounting screws Grounding the Chassis Setting the Chassis on a Desktop Chassis Grounding Chassis Ground Connection on the Cisco ISR 4451-X Chassis Connecting Power 15A, 120VAC 16A, 240VAC. Statement Connecting to AC Power Connecting to the Serial Port with Microsoft Windows Connecting to a Console Terminal or ModemPort Type Cable Section Serial RJ-45 EIA RJ-45 No parity Stop bit No flow control Connecting to the Console Port with Mac OS To disconnect the OS X USB console from the Terminal window Connecting to the Console Port with Linux Installing the Cisco Microsoft Windows 2000 USB Driver Installing the Cisco Microsoft Windows XP USB DriverInstalling the Cisco Microsoft Windows Vista USB Driver Using the Add Remove Programs utility Uninstalling the Cisco Microsoft Windows USB DriverUsing the Setup.exe program Uninstalling the Cisco Microsoft Windows Vista USB Driver Connecting to the Auxiliary Port Connecting a Modem to the Cisco ISR Connecting WAN, LAN, and Voice Interfaces OL-27644-01 Data sheet Connection Procedures and PrecautionsPorts and Cabling Port or Connection Port Type, Color1 Cable OL-27644-01 Using Cisco Setup Command Facility Performing the Initial Configuration on the Router Router when it is booted into Cisco IOS-XE You are now in the Setup Configuration UtilityTo proceed using the setup command facility, enter yes Basic management setup configures only enough connectivity Summary of the available interfaces is displayed Following configuration command script was created User prompt is displayed Completing the Configuration Type enable to enter privileged Exec mode Using Cisco IOS-XE CLI-Manual ConfigurationPress Return to bring up the Router prompt Command or Action Purpose Configuring the Router HostnameExample Configuring the Enable and Enable Secret Passwords Configuring the Console Idle Privileged Exec Timeout Gigabit Ethernet Management Interface Overview Configuring Gigabit Ethernet Interfaces Default Gigabit Ethernet ConfigurationGigabit Ethernet Port Numbering Optional Adds a description to an interface configuration Configuration modeDescription helps you remember what is attached to Troubleshooting Specifying a Default Route or Gateway of Last Resort Configuration ExamplesConfiguring IP Routing and IP Protocols Configuring the GigabitEthernet Interface Example Default Network Default RoutesGateway of Last Resort Establishes a static route Enables IP routing Configuration Examples Virtual terminal lines vty for remote console access Starts the line configuration command collection mode forMake sure that you configure all vty lines on your Line vty ? command What to Do Next Configuring the Auxiliary Line Auxiliary line Enable Configure terminal Line aux Verifying Network Connectivity Saving Backup Copies of Configuration and System Image Saving Your Router Configuration Copying from Flash Memory to a Tftp Server Example Copying the Startup Configuration to a Tftp Server Example 2012 Initial Configuration Verifying the Initial Configuration Verifying the Initial Configuration Environmental Variables and the Configuration Register ROM Monitor Overview and Basic ProceduresROM Monitor Overview Accessing ROM Monitor Mode with a Terminal Connection Entering ROM Monitor ModeNetwork Management Access and ROM Monitor Mode Checking the Current ROMmon Version XXX-XXXX-XX Displaying the Available ROM Monitor Commands Commonly Used ROM Monitor Commands2describes the available help commands for ROM Monitor mode Examples Environment Variable Settings Displaying the Configuration Register SettingChanging the ROM Monitor Prompt Frequently Used Environmental Variables Displaying Environment Variable Settings Entering Environment Variable Settings Exiting ROM Monitor ModeSaving Environment Variable Settings Respond to each prompt as instructed Initiates the configuration register configuration prompts Configuration ExampleResets and initializes the router Upgrading the ROMmon for a Router Example of Upgrade Router# show romvar FRUs Internal and External Modules Safety Warnings 1029 T1 SFP Statement Removing and Replacing the Chassis Cover Accessing Internal ModulesRemoving the Cover Replacing the Cover Cover screws Locating Internal and External Slots for Modules Overview of the SSD Carrier Card NIM NIM-SSD NIM-SSD Slot 0 Factory-configuredISC slot DIMMs 3shows the front panel of the SSD NIM Overview 1describes the LEDs on the NIM-SSD as shown in Figure LEDs on the NIM-SSDRepresents Color Description Solid state drive Green SSD present Slot Off No SSD in slot Power consumption maximum 20W 2lists the specifications of the SSD Carrier Card NIMEnvironmental Transportation and Storage Top View of the SSD Carrier Card NIM with Serial Number Solid State Drives SSD Solid State Drive SSD Opening the SSD Slot Cover Installing the SSD Drives into the NIM Carrier Card Removing the SSD Drives from the NIM-SSD 10 Pulling out the Solid State Drives Tabs to pull out the SSD drives Restrictions Removing and Replacing the Cisco ISR 4451-X NIM-SSD Drives Removing the NIM-SSD from the Router 12 Removing the NIM-SSD from the Router Replacing the NIM-SSD on the Router Installing and Removing DDR DIMMsLocating and Orienting Dimm 14 Dimm Showing Polarization Notch Polarization notch 15 Removing a Dimm Removing a Dimm 16 Dimm Showing Polarization Notch Installing a Dimm 17 Handling the DIMMs 18 Installing a Dimm Installing and Removing NIMs and SMs Software Requirement for SMs Installing an SMLocating an SM or NIM Removing an SM or NIM Verifying SM Installation Installing and Removing the PVDM4 PVDM4 Location and Orientation Tools and Equipment Required During Installation Any module replacement Installing the PVDM4 on the Motherboard of the Cisco ISRGround Remove the cover Removing the PVDM4 from the Motherboard of the Cisco ISR Screws ConnectorStandoffs 22 Network Interface Module with PVDM4 Captive Screws Ports Network Card Removing and Replacing the USB Flash Token Memory Stick This completes the USB Flash memory installation procedure Replacing the Cisco ISR 4451-X Power Supply 24 Power Supply Unit Inserting PoE Supply in an Ethernet Switch Network Module Replacing the Power Supply on the Cisco ISR 4451-Xs Replacing a Fan Tray Cisco ISR 4451-X Power and RPS Error MessagesReplacing the Cisco ISR 4451-X Fan Tray Before Hot-Swapping a Fan Tray Fan Tray 26 Cisco ISR 4451-X Fan Tray Replacement Removing a CompactFlash Memory Card Removing and Installing a CompactFlash Memory Card Installing a CompactFlash Memory Card Installing SFP Modules 1543.73 DWDM-SFP-4453 DWDM-SFP-43731544.53 DWDM-SFP-4612 1546.12 DWDM-SFP-4692 Removing SFP Modules Laser Safety GuidelinesConnect the network cable to the SFP module Disconnect the SFP latch. See Figure Removing, Replacing, and Installing an Internal PoE Card 29 Location of the PoE Card Requirement Online Insertion and Removal OIR Hot-Swapping Hot-Swapping Procedures OIR ProceduresRemoving a Module Inserting a Data or Voice Module