2.1. Phone Adapter LED Status
LED Color(s) Activity Description
Off Power OFF
Blue On Power On / Device Ready
Blue Blinking Booting / System Self-Test / Firmware upgrade
Power Blue
Red On POST (Power On Self Test) failure (not boota
b
le)
or Device malfunction
Off No Connection on Ethernet
Blue On Ethernet Connection established
Ethernet Blue
Blue Blinking Data Sending / Receiving
Off Phone is not in use/not provisioned or registered
Blue On Registered/provisioned
Phone 1 /
Phone 2 Blue
Blue Blinking Phone is in use/Incoming Call detected
2.2. Broadband Router (RT31P2) LED Status
LED Color(s) Activity Description
Off Power OFF
Solid Green Power On
Green
Blinking Booting / System Self-Test / Firmware upgrade
Power Green
Red On POST (Power On Self Test) failure (not bootable)
or Device malfunction
Off No Connection on Ethernet
Solid Green Ethernet Connection established
Ethernet Blue Green
Blinking Data Sending / Receiving
Off Phone is not in use/not provisioned or registered
Green On Registered/provisioned
Phone 1 /
Phone 2 Blue Green
Blinking Phone is in use/Incoming Call detected
4. One 5 Volt Power Adapter Interface (Figure 3, above) for PAP2 Phone Adapter and 12 Volt Power
Adapter for the Broadband Router (RT31P2)
This interface accepts the PHONE ADAPTER power adapter that came with the unit. Linksys does
not support the use of any other power adapters other then the power adapter that was shipped with
the PHONE ADAPTER unit or the Broadband Router (RT31P2)
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
19