effect for the duration of the current call.
5.5. Calling Line Identification Restriction (CLIR) – Caller ID Blocking Service Description This feature allows the user to block the
delivery of their Caller ID to the number they
are calling. This feature must be activated prior
to dialing each call and is only in effect for the
duration of each call.
User Action Required to Activate or Use Lift the receiver
Listen for dial tone
Press *__
Listen for dial tone
Dial the telephone number you are calling
You must repeat this process at the start of
each call
Expected Call and Network Behavior The user activates this service to hide his
Caller ID when making an outgoing call.
User Action Required to Deactivate or End No action required. This service is only in
effect for the duration of the current call.
5.6. Call Waiting Service Description The user can accept a call from a 3rd party
while engaging in an active call. The PHONE
ADAPTER shall alert the subscriber of the 2nd
incoming call by playing a call waiting tone.
User Action Required to Activate or Use If the you choose to answer the second call
either:
Press and release your phone's switch hook
(the button you release when you take your
phone off the hook) or
Press the flash button (if your phone has one).
This puts your first call on hold and
automatically connects you to your second call.
To put your second caller back on hold and
return to your first caller, press the switch hook
or flash button again. (You can alternate
between calls as often as you like.)
Expected Call and Network Behavior If the user is on a call when another call comes
in they will hear a series of beeps / tones
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
81