Cisco Systems Linksys PAP2, RT31P2 - page 31

PHONE ADAPTER.
Set Network Mask 121 Enter value using
numbers on the
telephone key pad.
Use the * (star) key
when entering a
decimal point.
DHCP must be “Disabled”
otherwise you will hear,
“Invalid Option,” if you try
to set this value.
Requires Password
Check Static Gateway IP
Address 130 None IVR will announce the current gateway IP
address of PHONE
ADAPTER.
Set Static Gateway IP
Address 131 Enter IP address using numbers on
the telephone key
pad. Use the *
(star) key when
entering a decimal
point.
DHCP must be “Disabled”
otherwise you will hear,
“Invalid Option,” if you try
to set this value.
Requires Password
Check MAC Address 140 None IVR will announce the
MAC address of PHONE
ADAPTER in hex string
format.
Check Firmware Version 150 None IVR will announce the
version of the firmware
running on the PHONE
ADAPTER.
Check Primary DNS
Server Setting 160 None IVR will announce the
current setting in the
Primary DNS field.
Set Primary DNS Server 161 Enter IP address
using numbers on
the telephone key
pad. Use the *
(star) key when
entering a decimal
point.
Requires Password
Check PHONE
ADAPTER’s Web Server
Port
170 None IVR will announce the
port that the web server
is listening on. (Default is
80)
Enable/Disable Web
Server of PHONE
ADAPTER
7932 Enter 1 to enable
Enter 0 to disable Requires Password
Manual Reboot of Unit 732668 None After you hear “Option
Successful,” hang-up. Unit
will reboot automatically.
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
31