3. After one minute of inactivity, the unit times out. The user will need to re-enter the configuration
menu from the beginning by pressing * * * *.
4. If, while entering a value (like an IP address) and you decide to exit without entering any changes,
you may do so by pressing the * (star) key twice within a half second window of time. Otherwise,
the entry of the * (star) key will be treated as a dot (decimal point).
Example: To enter IP address, use numbers 0 – 9 on the telephone key pad and use the * (star) key
to enter a decimal point.
To enter the following IP address value: 192.168.2.215
A. Use the touchtone key pad to enter: 192*168*2*215#
B. When prompted, enter 1 to save setting to configuration.
C. Hang-up the phone to cause setting to take effect.
- or -
D. Enter the value of the next setting category to modify . . .
5. Hang-up the phone to cause all settings to take effect.
PHONE ADAPTER Interactive Voice Response (IVR) Menu:
IVR Action IVR Menu Choice Parameter(s) Notes:
Enter IVR Menu * * * * None Ignore SIT or other tones
until you hear, “Linksys
configuration menu.
Please enter option
followed by the pound key
or hang-up to exit.”
Exit IVR Menu 3948 None
Check DHCP 100 None IVR will announce if DHCP
in enabled or disabled.
Enable/Disable DHCP 101 Enter 1 to enable
Enter 0 to disable
Requires Password
Check IP Address 110 None IVR will announce the
current IP address of
PHONE ADAPTER.
Set Static IP Address 111 Enter IP address
using numbers on
the telephone key
pad. Use the *
(star) key when
entering a decimal
point.
DHCP must be “Disabled”
otherwise you will hear,
“Invalid Option,” if you try
to set this value.
Requires Password
Check Network Mask 120 None IVR will announce the
current network mask of
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
30