Cisco Systems Linksys PAP2, RT31P2 4.4. Basic Account Configuration

- Parallel DNS query mode: PHONE ADAPTER will send the same request to all the DNS servers

at the same time when doing a DNS lookup, the first incoming reply will be accepted by PHONE

ADAPTER.

- To log SIP messages, Debug Level must be set to at least 2.

- If both Debug Server and Syslog Server are specified, _Syslog messages are also logged to the

Debug Server.

4.4. Basic Account Configuration

Basic SIP Account Configuration is typically straightforward, involving only a handful of key

parameters. All of these parameters are configured on a per-line basis.

The Line_Enable parameters control whether a line is enabled or not. The Proxy setting is the

address of the SIP Registrar (usually collocated with a SIP Proxy) for the account. The User_ID is

the username or phone number of the SIP account. The Proxy and User_ID together form the SIP

URI. For example: User_ID = alice ; Proxy = sip.provider.net:5060 ; the SIP URI used for registration

would be sip:alice@sip.provider.net:5060.

The Password is the password used for Digest authentication. With some providers, the username

used for authentication is different from the User_ID used in the SIP From header. For example,

Alice Smith could have a User_ID of 1234, and a Digest username of alice.smith. In this situation, set

the Auth_ID to alice.smith and set Use_Auth_ID to yes. The Display_Name is the string that will

appear in quotes in the From header. It can be an arbitrary string such as a name (for example "Alice

Smith") or a local phone number (for example "5551212").

Proxy and Registration

Proxy SIP Proxy Server for all outbound requests FQDN

parameter is ignored if <Proxy> is not specified. Bool Yes

Make Call Without

Reg Allow making outbound calls without successful

(dynamic) registration by the unit. If “No”, dial tone

will not play unless registration is successful

Bool No

Ans Call Without Reg Allow answering inbound calls without successful

(dynamic) registration by the unit Bool No

PHONE ADAPTER will periodically renew

registration shortly before the current registration

expired. This parameter is ignored if <Register> is

“no”. Range: 0 – (231 – 1) sec

Time0 3600

Use DNS SRV Whether to use DNS SRV lookup for Proxy and

Outbound Proxy Bool No

DNS SRV Auto Prefix If enabled, the PHONE ADAPTER will

automatically prepend the Proxy or Outbound

Proxy name with _sip._udp when performing a

DNS SRV lookup on that name

Bool No

Proxy Fallback Intvl This parameter sets the delay (sec) after which the

PHONE ADAPTER will retry from the highest

priority proxy (or outbound proxy) servers after it

has failed over to a lower priority server. This

Time0 3600