Cisco Systems Linksys PAP2, RT31P2

Cfwd Last Deact Code Cancel call forward last ActCode *83

Block Last Act Code Block the last inbound call ActCode *60

Block Last Deact Code Cancel blocking of the last inbound call ActCode *80

Accept Last Act Code Accept the last outbound call. Let it ring

through when DND or Call Forward All is in

effect

ActCode *64

Accept Last Deact Code Cancel Accept Last ActCode *84

Call Back Act Code Callback when the last outbound call is not

busy ActCode *66

Call Back Deact Code Cancel callback ActCode *86

CW_Act_Code Enable Call Waiting on all calls ActCode *56

CW_Deact_Code Disable Call Waiting on all calls ActCode *57

CW_Per_Call_Act_Code Enable Call Waiting for the next call ActCode *71

CW_Per_Call_Deact_Code Disable Call Waiting for the next call ActCode *70

Block_CID_Act_Code Block CID on all outbound calls ActCode *67

Block_CID_Deact_Code Unblock CID on all outbound calls ActCode *66

Block_CID_Per_Call_Act_Code Block CID on the next outbound call ActCode *81

Blcok_CID_Per_Call_Deact_Code Unblock CID on the next inbound call ActCode *82

Block_ANC_Act_Code Block all anonymous calls ActCode *77

Block_ANC_Deact_Code Unblock all anonymous calls ActCode *87

DND_Act_Code Enable Do Not Disturb ActCode *78

DND_Deact_Code Disable Do Not Disturb ActCode *79

CID_Act_Code Enable Caller-ID Generation ActCode *65

CID_Deact_Code Disable Call-ID Generation ActCode *85

CWCID_Act_Code Enable Call Waiting Caller-ID generation ActCode *25

CWCID_Deact_Code Disable Call Waiting Caller-ID generation ActCode *45

Dist_Ring_Act_Code Enable Distinctive Ringing ActCode *61

Dist_Ring_Deact_Code Disable Distinctive Ringing ActCode *81

Speed Dial Act Code Assign a speed dial number ActCode *74

Secure All Call Act Code Make all outbound calls secure ActCode *16

Secure No Call Act Code Make all outbound calls not secure ActCode *17

Secure One Call Act Code Make the next outbound call secure. This

operation is redundant if all outbound calls

are secure by default.

ActCode *18

Secure One Call Deact Code Make the next outbound call not secure.

This operation is redundant if all outbound

calls are not secure by default.

ActCode *19

In addition to the dynamic activation and deactivation codes, the following parameters control the

default activation or deactivation of internal parameters.

Parameter Name Description Type Default

CW Setting Call Waiting on/off by default for all calls Bool Yes

Block CID Setting Block Caller ID on/off by default for all calls Bool No

Block ANC Setting Block Anonymous Calls on or off Bool No

DND Setting Do Not Disturb on or off Bool No

CID Setting Caller ID Generation on or off Bool Yes

CWCID Setting Call Waiting Caller ID Generation on or off Bool Yes

Dist Ring Setting Distinctive Ring on or off Bool Yes