no user action is required.
If you deactivated call waiting and wish to
reinstate the service, do the following:
Lift the receiver
Listen for dial tone
Press *__
You will hear a confirmation tone signaling your
request to cancel Call Waiting has been
accepted.
5.8. Call-Waiting with Caller ID Service Description When the user is on the phone and has Call
Waiting active, the new caller’s Caller ID
information will be displayed on the users
phone display screen at the same time the user
is hearing the Call Waiting beeps / tones.
User Action Required to Activate or Use The telephone equipment connected to the
PHONE ADAPTER must support Call-Waiting
with Caller ID.
Expected Call and Network Behavior In between call waiting tone bursts, the
PHONE ADAPTER can generate a Caller-ID
signal to the attached phone when it is off
hook.
User Action Required to Deactivate or End Not applicable.
5.9. Voice Mail Service Description Service Providers may provide voice mail
service to their subscribers. Users have the
ability to retrieve voice mail via the telephone
connected to the PHONE ADAPTER.
User Action Required to Activate or Use The PHONE ADAPTER indicates that a
message is waiting by, playing stuttered dial
tone when the user picks up the handset.
To retrieve messages:
Lift the receiver
Listen for dial tone
Dial the phone number assigned to the PHONE
ADAPTER
You will be connected to the voice mail server
and prompted by a voice response system with
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
83