Administrators and/or users can check (read) and set (write) basic network configuration settings via
a touchtone telephone connected to one of the RJ-11 phone ports of the PAP2 model PHONE
ADAPTER.
Please Note:
Service Providers offering service using the PHONE ADAPTER may restrict, protect or turn off certain
aspects of the unit’s IVR and web configuration capabilities.
The Interactive Voice Response (IVR) capabilities of the PHONE ADAPTER are designed to give the
administrator and/or user basic read/write capabilities such that the unit can attain basic IP network
connectivity and the more advanced browser-based configuration menu may be accessed.
1. The PHONE ADAPTER IVR uses the following conventions: By factory default there is no
password and no password authentication is prompted for all the IVR settings. If administrator
password is set, password authentication will be prompted for certain IVR settings. See 3.4.2 for
detailed information about administrator password.
To input the password using the phone keypad, the following translation convention applies:
o To input: A, B, C, a, b, c -- press ‘2’
o To input: D, E, F, d, e, f -- press ‘3’
o To input: G, H, I, g, h, i -- press ‘4’
o To input: J, K, L, j, k, l -- press ‘5’
o To input: M, N, O, m, n, o -- press ‘6’
o To input: P, Q, R, S, p, q, r, s -- press ‘7’
o To input: T, U, V, t, u, v -- press ‘8’
o To input: W, X, Y, Z, w, x, y, z -- press ‘9’
o To input all other characters in the administrator password, press ‘0’
Note: This translation convention only applies to the password input.
For example: to input password “test#@1234” by phone keypad, you need to press the following
sequence of digits: 8378001234.
2. After entering a value, press the # (pound) key to indicate end of input.
o To Save value, press ‘1’
o To Review the value, press ‘2’
o To Re-enter the value, press ‘3’
o To Cancel the value entry and return to the main configuration menu, press ‘*’ (star)
Notes:
o The final ‘#’ key won’t be counted into value.
o Saved settings will take effect when the telephone is hung-up and if necessary, the PHONE
ADAPTER will automatically reboot.
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
29