Cisco Systems Linksys PAP2, RT31P2 4.7. Supplementary Services

Prefer G723 Code Dialing code will make this codec the preferred

codec for the associated call. ActCode *01723

Force G723 Code Dialing code will make this codec the only

codec that can be used for the associated call. ActCode *02723

Prefer G726r16 Code Dialing code will make this codec the preferred

codec for the associated call. ActCode *0172616

Force G726r16 Code Dialing code will make this codec the only

codec that can be used for the associated call. ActCode *0272616

Prefer G726r24 Code Dialing code will make this codec the preferred

codec for the associated call. ActCode *0172624

Force G726r24 Code Dialing code will make this codec the only

codec that can be used for the associated call. ActCode *0272624

Prefer G726r32 Code Dialing code will make this codec the preferred

codec for the associated call. ActCode *0172632

Force G726r32 Code Dialing code will make this codec the only

codec that can be used for the associated call. ActCode *0272632

Prefer G726r40 Code Dialing code will make this codec the preferred

codec for the associated call. ActCode *0172640

Force G726r40 Code Dialing code will make this codec the only

codec that can be used for the associated call. ActCode *0272640

Prefer G729a Code Dialing code will make this codec the preferred

codec for the associated call. ActCode *01729

Force G729a Code Dialing code will make this codec the only

codec that can be used for the associated call. ActCode *02729

4.7. Supplementary Services

Each line of the PHONE ADAPTER has settings which enable or disable each of the supplementary

services implemented directly in the PHONE ADAPTER. The expected behavior when a specific

service is enabled is described in Section 5.

The PHONE ADAPTER provides native support of a large set of enhanced or supplementary

services. All of these services are optional. The parameters listed in the following table are used to

enable or disable a specific supplementary service. A supplementary service should be disabled if a)

the user has not subscribed for it, or b) the Service Provider intends to support similar service using

other means than relying on the PHONE ADAPTER.

Parameter Name Description Type Default

Call Waiting Serv Enable Call Waiting Service Bool Yes

Block CID Serv Enable Block Caller ID Service Bool Yes

Block ANC Serv Enable Block Anonymous Calls Service Bool Yes

Dist Ring Serv Enable Distinctive Ringing Service Bool Yes

Cfwd All Serv Enable Call Forward All Service Bool Yes

Cfwd Busy Serv Enable Call Forward Busy Service Bool Yes

Cfwd No Ans Serv Enable Call Forward No Answer Service Bool Yes

Cfwd Sel Serv Enable Call Forward Selective Service Bool Yes

Cfwd Last Serv Enable Forward Last Call Service Bool Yes

Block Last Serv Enable Block Last Call Service Bool Yes

Accept Last Serv Enable Accept Last Call Service Bool Yes

DND Serv Enable Do Not Disturb Service Bool Yes

CID_Serv Enable Caller ID Service Bool Yes