Confirm Tone This should be a brief tone to notify the
user that the last input value has been
accepted.
ToneScript 600@-
16;1(.25/.25/1)"
SIT1 Tone An alternative to <Reorder Tone> played
when an error occurs while making an
outbound call. The RSC to trigger this tone
is configurable (see Section ???)
ToneScript 985@-16,1428@-
16,1777@-
16;20(.380/0/1,.380
/0/2,.380/0/3,0/4/0)
SIT2 Tone See <SIT1 Tone> ToneScript 914@-16,1371@-
16,1777@-
16;20(.274/0/1,.274
/0/2,.380/0/3,0/4/0)
SIT3 Tone See <SIT1 Tone> ToneScript 914@-16,1371@-
16,1777@-
16;20(.380/0/1,.380
/0/2,.380/0/3,0/4/0)
SIT4 Tone See <SIT 1 Tone> ToneScript 985@-16,1371@-
16,1777@-
16;20(.380/0/1,.274
/0/2,.380/0/3,0/4/0)
MWI Dial Tone1This tone is played instead of <Dial Tone>
when there are unheard messages in the
subscriber’s mail box
ToneScript 350@-19,440@-
19;2(.1/.1/1+2);10(*
/0/1+2)
Cfwd Dial Tone Special dial tone played when call forward
all is activated ToneScript 350@-19,440@-
19;2(.2/.2/1+2);10(*
/0/1+2)
Holding Tone Indicate to the local user that the far end
has placed the call on hold ToneScript 600@-
16;*(.1/.1/1,.1/.1/1,.
1/9.5/1)
Conference Tone Plays to all parties when a 3-way
conference is in progress ToneScript 350@-
16;30(.1/.1/1,.1/9.7/
1)
Secure Call
Indication Tone This tone is played when a call is
successfully switched to secure mode. It
should be played only for a short while (<
30s) and at a reduced level (< -19 dBm) so
that it will not interfere with the
conversation.
ToneScript 397@-19,507@-
19;15(0/2/0,.2/.1/1,.
1/2.1/2)
Notes:
1. Reorder Tone is played automatically when <Dial Tone> or any of its alternatives times out
2. Off Hook Warning Tone (also called Howler Tone) is played when Reorder Tone times out
4.10. Less Frequently Used Paramters
4.10.1. Advanced Protocol Parameters
Parameter Name Description Type Default
SIP Parameters
Max Forward SIP Max-Forward value. Range: 1 – 255 Uns8 70
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
70