Cisco Systems ME3600X24CXM manual SD Memory Slot, LEDs, SFP Module Patch Cable

Chapter 1 Product Overview

Front Panel

SFP Module Patch Cable

The SFP downlink ports supports the SFP module patch cable, a 0.5-meter, copper, passive cable with SFP module connectors at each end. This cable is only used with 1-Gigabit Ethernet SFP ports to connect two switches in a cascaded configuration.

See the “Inserting and Removing the SFP+ Module Patch Cable” section on page 2-17for more information about using the SFP module patch cable.

You can order the SFP module patch cable (part number CAB-SFP-50CM=).

SD Memory Slot

The switch has an SD (secure digital) memory slot for additional non-volatile storage. You can save configurations or Cisco IOS images and transfer them to other systems. The memory slot supports standard SD (1 MB and 2 GB) memory cards or SDHC (4 GB) memory cards.

LEDs

You can use the switch system and port LEDs to monitor switch activity and performance.

•Switch LED Panels, page 1-7

•System LED Description, page 1-7

•Power Supply Module Input LED Description, page 1-8

•Power Supply and Fan LED Description, page 1-8

•Ethernet Management Port LED Description, page 1-8

•Alarm LEDs Description, page 1-9

•Sync LED Description, page 1-9

•SD Card LED Description, page 1-9

•Port LEDs Description, page 1-10

Cisco ME 3800X and ME 3600X Switch Hardware Installation Guide

1-6 OL-22168-01