Cisco Systems ME3600X24CXM manual Enter an enable password, and press Return

Appendix C Configuring the Switch with the CLI-Based Setup Program

Entering the Initial Configuration Information

Step 3 Enter an enable secret password, and press Return.

The password can be from 1 to 25 alphanumeric characters, can start with a number, is case sensitive, allows spaces, but ignores leading spaces. The secret password is encrypted and the enable password is in plain text.

Enter enable secret: secret_password

Step 4 Enter an enable password, and press Return.

Enter enable password: enable_password

Step 5 Enter a virtual terminal (Telnet) password, and press Return.

The password can be from 1 to 25 alphanumeric characters, is case sensitive, allows spaces, but ignores leading spaces.

Enter virtual terminal password: terminal-password

Step 6 (Optional) Configure Simple Network Management Protocol (SNMP) by responding to the prompts. You can also configure SNMP later through the CLI. To configure SNMP later, enter no.

Configure SNMP Network Management? [no]: no

Current interface summary

Any interface listed with OK? value ''NO'' does not have a valid configuration

Interface	IP-Address	OK?	Method	Status	Protocol
GigabitEthernet0	unassigned	NO	unset	up	up
Vlan1	unassigned	NO	unset	up	up
GigabitEthernet0/1	unassigned	YES	unset	up	up
GigabitEthernet0/2	unassigned	YES	unset	up	up
GigabitEthernet0/3	unassigned	YES	unset	up	up
GigabitEthernet0/4	unassigned	YES	unset	up	up
GigabitEthernet0/5	unassigned	YES	unset	up	up
GigabitEthernet0/6	unassigned	YES	unset	up	up
GigabitEthernet0/7	unassigned	YES	unset	up	up
GigabitEthernet0/8	unassigned	YES	unset	up	up
GigabitEthernet0/9	unassigned	YES	unset	up	up
GigabitEthernet0/10	unassigned	YES	unset	up	up
GigabitEthernet0/11	unassigned	YES	unset	down	down
GigabitEthernet0/12	unassigned	YES	unset	down	down
GigabitEthernet0/13	unassigned	YES	unset	up	up
GigabitEthernet0/14	unassigned	YES	unset	up	up
GigabitEthernet0/15	unassigned	YES	unset	up	up
GigabitEthernet0/16	unassigned	YES	unset	up	up
GigabitEthernet0/17	unassigned	YES	unset	up	up
GigabitEthernet0/18	unassigned	YES	unset	up	up
GigabitEthernet0/19	unassigned	YES	unset	up	up
GigabitEthernet0/20	unassigned	YES	unset	up	up
GigabitEthernet0/21	unassigned	YES	unset	up	up
GigabitEthernet0/22	unassigned	YES	unset	up	up
GigabitEthernet0/23	unassigned	YES	unset	up	up
GigabitEthernet0/24	unassigned	YES	unset	up	up
TenGigabitEthernet0/1	unassigned	YES	unset	up	up
TenGigabitEthernet0/2	unassigned	YES	unset	up	up

Step 7 Enter the interface name (physical interface or VLAN name) of the interface that connects to the management network, and press Return. For this release, always use vlan1 as that interface.

Enter interface name used to connect to the

management network from the above interface summary: vlan1

Cisco ME 3800X and ME 3600X Switch Hardware Installation Guide

OL-22168-01 C-3