3-11
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS
OL-1744-02
Chapter 3 Installing the Software Driver Keywords and Settings
ATIMDURATION Between 0 and less than
the beacon interval (Optional)—Specifies the length of time fo r
ATIMs following a beacon.
Default: 5 Kusec
Constant Awake Mode is 0.
In ad hoc mode, this value must be non -zero if
POWERSAVEMODE is PSP or FASTPSP.
This value is used only when s t ar ti ng a new
network. When joining a network, the value
currently in use is adopted.
SLEEPFORDTIM ON (YES)
OFF (NO) (Optional)—Allows the node to sleep through
DTIMs for extra power savin g. Bro adca st and
multicast traffic might be missed.
Default: OFF
Used only in INFRASTRUCTURE mode
when POWERSAVE mode is PSP or
FASTPSP.
LISTENTIME 0–0xFFFF (Optional)—Determines how often to awaken
for beacons.
Default: 200 Kusec (200 ms)
Used only in INFRASTRUCTURE mode
when POWERSAVE mode is PSP or
FASTPSP.
The PC card always awakens to r ece ive
DTIMs when in PSP Mode, unless sleep for
DTIMs is set.
FASTLISTENTIME 0–0xFFFF (Optional)—Determines how often to awaken
for beacons.
default: 100 Kusec (100 ms)
Used only in INFRASTRUCTURE mode
when POWERSAVE mode is PSP or
FASTPSP.
The PC Card always awakens to r ec eive
DTIMs when in FASTPSP Mode.
Table3-7 Power Management Variables (continued)
Variable Value Description