4-9
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS
OL-1744-02
Chapter 4 Utilities DOS Utilities
WEPDOS.EXE
Description Selects a transmit key index
Syntax WEPDOS [-tx # ] [ascii] [hex] [ - key#] [home] [- d ]
Options -tx# Selects the transmit key index ( 1, 2, 3,o r 4 ) fo r
enterprise networkin g
ascii A 5-character ASCII string
hex A 10-character hex digit string
-key# Default key index: 1, 2, 3, or 4
home Selects the key for use with home access points
-d Displays current se tt in gs
Standard Options
(Default settings in
brackets)
-p[IO base] IO base address (hex) [380]
-io#|-misa#|-isa# IO type, #={8|16}
-b [membase] Memory base address (hex) [D000:0]
-I [irq] Interrupt request (decimal) [5]
-s [slot] Slot number (decimal) [0]
-365 82365-card startup
-pci PCI-card startup
-nocheck I/O access not tested on startup
Remarks The card startup option (-365) is required to run this utility.
This example shows th e d is play after setting th e t ransmit key index to
#1 and then using the display (- d) opti on:
C:>WEPDOS -365 -p180 -tx1
Setting transmit key index to 1
C:>WEPDOS -365 -p180 -d
WEP128 encryption is enabled.
Enterprise and home networking is supported.
Firmware supports four keys.
C:\>