Cisco Systems RV042G manual Rack Mounting RV082 or RV016

Introduction	1
Mounting Options

STEP 2 Insert a screw into each hole, leaving a gap between the surface and the base of the screw head of 1 to 1.2 mm.

STEP 3 Place the router wall-mount slots over the screws and slide the router down until the screws fit snugly into the wall-mount slots.

Rack Mounting RV082 or RV016

You can mount the RV082 or RV016 in a standard size, 19-inch (about 48 cm) wide rack. The router requires 1 rack unit (RU) of space, which is 1.75 inches (44.45mm) high. Mounting brackets are provided.

!

CAUTION Do not overload the power outlet or circuit when installing multiple devices in a rack.

STEP 1 Place the router on a hard, flat surface.

STEP 2 Attach one of the supplied rack–mount brackets to one side of the router with the supplied screws. Secure the bracket tightly.

STEP 3 Follow the same steps to attach the other bracket to the opposite side.

STEP 4 Use suitable screws to securely attach the brackets to any standard 19-inch rack.

2

1

1 2 3 4

5 6 7 8

DMZ/Internet

Internet

278825

Cisco Small Business RV0xx Series Routers Administration Guide 14