Cisco Systems RV016, RV042G manual Setting Up the Network, Host Name and Domain Name, Setup

Setup	3
Setting Up the Network

Setting Up the Network

Use the Setup > Network page to set up your LAN, WAN (Internet connections), and DMZ interface.

To open this page: Click Setup > Network in the navigation tree.

NOTE Before navigating away from this page, click Save to save your settings, or click Cancel to undo them. Any unsaved changes are abandoned.

This page includes the following sections:

•Host Name and Domain Name, page 27

•LAN Setting (device IP address and subnets), page 28

•WAN Setting (Internet connection), page 31

•DMZ Setting, page 32

Host Name and Domain Name

Some ISPs require that you assign a host name and domain name to identify your router on the ISP network. Default values are provided, but you can change them if needed.

•Host Name: Keep the default setting or enter a host name specified by your ISP.

•Domain Name: Keep the default setting or enter a domain name specified by your ISP.

Cisco Small Business RV0xx Series Routers Administration Guide 27