Cisco Systems RV042G Creation of New Services, Click the System Management tab, Click Add to List

F

Bandwidth Management

This scenario explains how to ensure Quality of Service (QoS) on Vonage Voice over Internet Protocol (VoIP) phone service. This example uses Vonage; however, similar instructions will apply to other VoIP services. Refer to these topics:

•Creation of New Services, page 186

•Creation of New Bandwidth Management Rules, page 187

Creation of New Services

Create two new services, Vonage VoIP and Vonage 2.

STEP 1 Visit Vonage’s website at http://www.vonage.com. Find out the ports used for Vonage VoIP service.

STEP 2 Access the router’s configuration utility.

STEP 3 Click the System Management tab.

STEP 4 On the Bandwidth Management page, click Service Management.

STEP 5 On the Service Management page, enter a name, such as Vonage VoIP, in the Service Name field.

STEP 6 From the Protocol drop-down menu, select the protocol the VoIP service uses. For example, some VoIP devices use UDP.

STEP 7 Enter its SIP port range in the Port Range fields. For example, you can set the Port Range to 5060 to 5070 to make sure that all active ports are covered.

STEP 8 Click Add to List.

STEP 9 Add a second service. Enter a name, such as Vonage 2, in the Service Name field. STEP 10 From the Protocol drop-down menu, select UDP.

Cisco Small Business RV0xx Series Routers Administration Guide 186