
Bandwidth Management
Creation of New Bandwidth Management Rules
F
STEP 11 Enter the RTP port range in the Port Range fields. These are required for both incoming and outgoing traffic. For example, you can set the Port Range to 10000 to 25000 to make sure that all active ports are covered.
STEP 12 Click Add to List.
STEP 13 Click Save to save your changes.
Creation of New Bandwidth Management Rules
Create four new rules: Vonage VoIP (Upstream), Vonage VoIP (Downstream),
Vonage 2 (Upstream), and Vonage 2 (Downstream).
STEP 1 Set up a rule for upstream bandwidth for Vonage 1:
a.On the Bandwidth Management page, select Vonage VoIP from the Service
b.Enter the IP address or range you need to control. To include all internal IP addresses, keep the default value.
c.From the Direction
d.In the Min.Rate field, enter the minimum rate for the guaranteed bandwidth. For example, you can set a minimum rate of 40 kbit/sec.
e.In the Max.Rate field, enter the maximum rate for the maximum bandwidth. For example, you can set a maximum rate of 80 kbit/sec.
f.Select Enable to enable this rule.
g.After you have set up the rule, click Add to list.
STEP 2 Set up the rule for downstream bandwidth for Vonage 1.
a.Select Vonage VoIP from the Service
b.Enter the IP address or range you need to control. To include all internal IP addresses, keep the default value.
c.From the Direction
d.In the Min.Rate field, enter the minimum rate for the guaranteed bandwidth. For example, you can set a minimum rate of 40 kbit/sec.
Cisco Small Business RV0xx Series Routers Administration Guide | 187 |