Cisco Systems RV016, RV042G manual

VPN	9
Setting Up a Remote Access Tunnel for VPN Clients (Client To Gateway)

DNS hostname (available from providers such as DynDNS.com). Enter a Domain Name to use for authentication. The domain name can be used only for one tunnel connection.

-Dynamic IP + E-mail Addr.(USER FQDN) Authentication: Choose this option if this router has a dynamic IP address and does not have a Dynamic DNS hostname. Enter any Email Address to use for authentication.

•Local Security Group Type: Specify the LAN resources that can access this tunnel.

-IP Address: Choose this option to allow only one LAN device to access the VPN tunnel. Then enter the IP address of the computer. Only this device can use this VPN tunnel.

-Subnet: Choose this option (the default option) to allow all devices on a subnet to access the VPN tunnel. Then enter the subnetwork IP address and mask.

-IP Range: Choose this option to allow a range of devices to access the VPN tunnel. Then identify the range of IP addresses by entering the first address in the Begin IP field and the final address in the End IP field.

•Domain Name: If you chose to use domain name authentication, enter the domain name.

•Email: If you chose to use email authentication, enter the email address.

Remote Client Setup for Single User (“Tunnel” Type)

Specify the method for identifying the client to establish the VPN tunnel. The following options are available for a Single User, or “Tunnel” type, VPN.

•IP Only: Choose this option if the remote VPN client has a static WAN IP address. If you know the IP address of the client, choose IP Address, and then enter the address. If you do not know the IP address of the client, select IP by DNS Resolved, and then enter the real domain name of the client on the Internet. The router will get the IP address of the remote VPN client by DNS Resolved, and the IP address of the remote VPN client will be displayed in the VPN Status section of the Summary page.

•IP + Domain Name (FQDN) Authentication: Choose this option if this client has a static IP address and a registered domain name. Also enter a Domain Name to use for authentication. The domain name can only be used only for one tunnel connection.

Cisco Small Business RV0xx Series Routers Administration Guide 141