
Receiving Faxes
Signaling your pager when you receive a fax!
This feature allows your unit to call your pager when your unit receives a fax message.
1
2
3
4
5
6
Press (MENU).
Display: SYSTEM SET UP
Press K, then G @.
FAX PAGER
Press (START/COPY/SET).
MODE=OFF [Ÿÿ]
Press or
to select “ON”.
MODE=ON [Ÿÿ]
¡If this feature is not required, select “OFF”.
Press (START/COPY/SET).
NO.=
Enter your pager number.
Dial keypad (MENU)
1 2 3
4 5 6
7 8 9
0
(REDIAL/PAUSE)
(START/COPY/SET)
Fax/Copy
¡If this feature does not work properly, press (REDIAL/PAUSE) more than once at the end of
your telephone number to extend the paging time.
If you wish to display a message on your pager, enter the message after your pager number and pause(s).
Programming methods may vary depending on the pager company. Contact your pager company for details.
¡You can enter a total of 46 digits and/or pauses.
7 Press (START/COPY/SET).
SETUP ITEM [ ]
8 Press (MENU).
Note:
¡This feature is not available when the receive mode is set to the TEL mode.
75