
Error messages on the LCD display!
If the unit detects a problem, one or more of the following messages will appear on the display.
DISPLAY MESSAGE |
| CAUSE & REMEDY | |
|
|
| |
|
| ¡There is something wrong with the unit. Contact our service personnel (p. 122). | |
CALL SERVICE |
| ||
|
| ||
|
|
| |
|
|
| |
|
| ¡The front cover is open. Close it. | |
CHECK COVER | |||
|
| ||
|
|
| |
|
|
| |
|
| ¡The document is not fed into the unit properly. Reinsert the document. If | |
CHECK DOCUMENT | |||
| misfeeding occurs frequently, clean the document feeder rollers inside the unit | ||
|
| ||
| |||
|
| (p. 114). If the problem remains, adjust the feeder pressure (p. 109). | |
|
|
| |
|
| ¡The film cartridge is not inserted properly. Reinsert it correctly (p. 110, 111). | |
CHECK FILM | |||
|
| ||
|
|
| |
|
|
| |
|
| ¡The recording paper set lever is released. Push the lever back to reset (p. 20). | |
CHECK LEVER | |||
|
| ||
|
|
| |
|
|
| |
|
| ¡Memory (phone numbers, parameters, etc.) has been erased. | |
CHECK MEMORY | |||
|
| ||
|
|
| |
|
|
| |
|
| ¡The recording paper is not installed or the unit ran out of paper. Install paper | |
CHECK PAPER | |||
| (p. 20). | ||
|
| ||
| |||
|
| ¡The recording paper is not fed into the unit properly or has jammed near the | |
|
| recording paper entrance. Clear the jammed paper (see “When paper has | |
|
| jammed near the recording paper entrance” on page 108). | |
|
| Do not install folded or heavily curled paper in the paper tray. | |
|
|
| |
|
| ¡The unit has (a) document(s) in memory. See the other message’s instructions to | |
FAX IN MEMORY | |||
| print out the document(s). | ||
|
| ||
| |||
|
|
| |
|
| ¡The film is empty. Replace the film or film cartridge with a new one (p. 110, 111). | |
FILM EMPTY | |||
| ¡The film is slack. Tighten it (see step 8 on page 111) and install again. | ||
|
| ||
| |||
|
|
| |
|
| ¡The remaining film can print approx. 15 pages of letter size documents. Prepare a | |
FILM NEAR EMPTY | |||
| new film or film cartridge (p. 7). | ||
|
| ||
| |||
|
|
| |
|
| ¡The memory is full of received documents due to a lack of recording paper or a | |
MEMORY FULL | |||
| recording paper jam, etc. Install paper or clear the jammed paper. | ||
|
| ||
|
| ¡When performing memory transmission, the document being stored exceeds the | |
|
| memory capacity of the unit. Transmit the entire document by using manual or | |
|
| automatic transmission. | |
|
|
| |
|
| ¡The receiving unit is busy or ran out of recording paper. Try again. | |
NO FAX REPLY | |||
|
| ||
|
|
| |
|
|
| |
|
| ¡A recording paper is jammed under the film cartridge. Clear the jammed paper | |
PAPER JAMMED | |||
| (p. 107). | ||
|
| ||
|
|
| |
|
| ¡The fax function cannot be operated by the PC. The RS232C cable is not | |
PC FAIL OR BUSY | |||
| connected correctly, or the software is not running on the PC. | ||
|
| ||
|
|
|
96 | For Assistance, Call |
|
|