CK Electric Part KX-FMC230 (cont.), Hints for using the TEL/FAX mode, Changing from the TEL mode to the TEL/FAX mode

Receiving Faxes

TEL/FAX mode (cont.)!

Hints for using the TEL/FAX mode!

»If an extension telephone is connected, the facsimile unit and the extension telephone will ring as follows.

The extension telephone	The facsimile unit will ring up to
will ring twice.	3 times.
	5 sec.

TEL/FAX ring count Silent fax recognition ring count

If a fax calling tone (slow beep) is detected, the unit will automatically activate the fax function to receive documents without ringing.

The unit will automatically activate the fax function to receive documents.

Note:

¡You can change the number of rings for the TEL/FAX ring count and silent fax recognition ring count (see page 65).

¡The facsimile unit will display the following message when the extension telephone starts to ring.

INCOMING CALL

Changing from the TEL mode to the TEL/FAX mode!

Change the MANUAL RECEIVE setting from the TEL mode to the TEL/FAX mode.

1	Press (MENU). Display:
				SYSTEM SET UP
2	Press K, then @ H.
				MANUAL RECEIVE
3
	Press (START/COPY/SET).
				MODE=TEL	[ML]
4	Press	or	to select TEL/FAX.
				MODE=TEL/FAX[ML]
	¡To return to the TEL mode, select TEL.
5	Press (START/COPY/SET).
6	Press (MENU).
				SETUP ITEM [ ]
7
	If the FAX indicator light is on, press
	(AUTO\RECEIVE) to turn off the AUTO RECEIVE
	mode.
				TEL/FAX MODE

Dial keypad (MENU)

1 2 3

4 5 6

7 8 9

0

(START/COPY/SET)

AUTO RECEIVE

FAX

The FAX indicator is off.

64